Fedora 27 no hdmi output on AMD card

by artix   Last Updated January 13, 2018 17:01 PM

I just bought new laptop with AMD Radeon RX 550M card, installed fresh new Fedora 27 and everything was working properly.

But...

After update (dnf update) and restarting laptop my hdmi stopped working. I dind't install any drivers manually. Do you maybe have any suggestions what might gone wrong? I provide lspci and xrandr output:

lspci

00:00.0 Host bridge: Intel Corporation Device 5914 (rev 08)
00:02.0 VGA compatible controller: Intel Corporation Device 5917 (rev 07)
00:14.0 USB controller: Intel Corporation Sunrise Point-LP USB 3.0 xHCI Controller (rev 21)
00:14.2 Signal processing controller: Intel Corporation Sunrise Point-LP Thermal subsystem (rev 21)
00:15.0 Signal processing controller: Intel Corporation Sunrise Point-LP Serial IO I2C Controller #0 (rev 21)
00:16.0 Communication controller: Intel Corporation Sunrise Point-LP CSME HECI #1 (rev 21)
00:17.0 SATA controller: Intel Corporation Sunrise Point-LP SATA Controller [AHCI mode] (rev 21)
00:1c.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #1 (rev f1)
00:1c.4 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #5 (rev f1)
00:1d.0 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #9 (rev f1)
00:1d.1 PCI bridge: Intel Corporation Sunrise Point-LP PCI Express Root Port #10 (rev f1)
00:1d.2 PCI bridge: Intel Corporation Device 9d1a (rev f1)
00:1f.0 ISA bridge: Intel Corporation Device 9d4e (rev 21)
00:1f.2 Memory controller: Intel Corporation Sunrise Point-LP PMC (rev 21)
00:1f.3 Audio device: Intel Corporation Sunrise Point-LP HD Audio (rev 21)
00:1f.4 SMBus: Intel Corporation Sunrise Point-LP SMBus (rev 21)
01:00.0 Display controller: Advanced Micro Devices, Inc. [AMD/ATI] Lexa PRO [Radeon RX 550] (rev c0)
02:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller SM961/PM961
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
04:00.0 Network controller: Intel Corporation Dual Band Wireless-AC 3165 Plus Bluetooth (rev 99)
05:00.0 SD Host controller: O2 Micro, Inc. SD/MMC Card Reader Controller (rev 01)

xrandr -q

Screen 0: minimum 320 x 200, current 1920 x 1080, maximum 8192 x 8192
XWAYLAND0 connected 1920x1080+0+0 (normal left inverted right x axis y axis) 340mm x 190mm
1920x1080     59.96*+

What might be worth to mention: I run bios in legacy support mode (not UEFI), graphic card is choosen to be discrete.



Related Questions


HDMI output not working when logged in on Fedora 26

Updated August 13, 2017 03:01 AM

Connecting more than 2 monitors to PC

Updated September 21, 2015 10:00 AM

How to correctly connect my monitors?

Updated June 17, 2015 09:00 AM

DVI to HDMI/DisplayPort with 2560x1440

Updated December 20, 2015 18:00 PM

Disable HDMI auto-switch in windows 7

Updated March 01, 2016 05:00 AM